Join the list

What's your bathroom biome? How our two-minute check works

Your bathroom biome is the damp little climate your towels, bath mat and walls live in: how humid the room gets, and how long it stays that way. Our free two-minute check estimates it from five things. What you can see counts most: how fast your towel and mat actually dry.

A woman touches her bath towel at bedtime to feel whether it is still damp.

Sources: US EPA, US Department of Energy (Building America Solution Center), Home Ventilating Institute, NIOSH, National Weather Service, Open-Meteo, Scientific Reports, Journal of Building Physics. Last reviewed November 19, 2026.

Take the 2-minute check →

Try this tonight. Put your hand on your bath towel before bed. If it's still cool and damp hours after your morning shower, your bathroom just told you something the box your fan came in can't.

Fans are usually rated by the air they move in a factory. Ducts and installation can eat into that, which is why ENERGY STAR, in the Department of Energy's building guide, says to buy a fan rated at least 70 CFM when your bathroom needs 50.2 Your towel has no rating to live up to. It dries as fast as the room lets it, with the fan, the window, the heat and the weather all counted at once.

That's the idea behind the Bathroom Biome: start with what you can see, then fill in the rest from published standards, two studies and this week's weather where you live.

On this page
  1. 01The check at a glance: five parts, 100 points
  2. 02What is a bathroom biome?
  3. 03What does the check weigh, and why does drying count most?
  4. 04Where do the numbers come from? Seven sources
  5. 05How does the check estimate your humid hours?
  6. 06Why does this week's weather change your score?
  7. 07How should you read your score?
  8. 08Three checks you can do tonight, no quiz needed

The check at a glance: five parts, 100 points

PartPointsWhat it looks atThe yardstick behind it
Observed drying30How long your towel takes to dry, and how your mat feels an hour after a showerWhat you see in your own bathroom
Humidity exposure25Our estimate of the hours a day your bathroom spends above 60% humidity, plus how steamed up your mirror getsEPA's 60% line · this week's dew point (Open-Meteo) · Vinha et al. 2018
Towel and mat habits20How you hang towels, how old your towels and mat are, your type of matKato et al. 2023
Ventilation15Your fan, how long it runs after a shower, your windowASHRAE 62.2 · Home Ventilating Institute
Warning signs10Dark spots and how big the biggest patch is, a musty smell, pink or orange staining, peeling paintNIOSH's patch-size scale

A higher score means more moisture risk. The thresholds come from the sources below. The weights are our own call, and we show every one of them.

What is a bathroom biome?

A bathroom biome is the moisture life of your bathroom: how wet the air gets when you shower, how long it stays that way, and what's still damp the next morning. A biome is a habitat shaped by its climate, like a rainforest or a desert. Your bathroom has its own, and it's the strangest one in the house: a small room that gets a hot, steamy downpour once or twice a day and then has to dry itself out.

Everything in there runs on that cycle. Towels, the bath mat, grout, caulk, the paint on the ceiling. The sooner the room gets back to dry, the less time any of it spends damp.

The check estimates those conditions. It doesn't sample what's growing, and it doesn't need to, because the EPA's whole approach starts with water: "The key to mold control is moisture control."1

What does the check weigh, and why does drying count most?

The Bathroom Biome check weighs five things, adding up to 100 points, and observed drying gets the biggest share: 30. A towel that's dry two hours after a shower tells you your fan, window, heating and weather are doing their job, whatever the setup looks like on paper.

The answers you pick from:

  1. Observed drying. Your towel dries in under 2 hours, 2 to 6, 6 to 12, or it's still damp at next use. An hour after a shower, your mat is completely dry, slightly cool or damp, noticeably damp, or still wet. The towel counts a little more than the mat.

  2. Humidity exposure. Your ZIP code (for this week's weather), how often your home runs heat or AC, showers a day (1 to 4 or more), and how steamed up the room gets, from a clear mirror to a dripping one. How we turn that into hours is two sections down.

  3. Towel and mat habits. Spread out to dry, hanging but bunched up, or left in a pile. Less than 6 months old, up to over 2 years. A washable fabric mat, a foam or rubber-backed one, a stone one, or none.

  4. Ventilation. A fan with a switch, just a vent, or neither. A fan that stays off, runs only while the water's on, runs 5 to 20 minutes after, or 30 minutes or more. A window you never open, open sometimes, or open every shower.

  5. Warning signs. Dark spots (and whether the biggest patch is smaller than a sheet of paper, up to a door, or bigger), a musty smell, pink or orange staining, peeling paint.

Ventilation gets just 15 points for a reason: what's installed doesn't always match what happens. When your setup and your towels disagree, the check believes your towels. When your towels dry fast, the check cuts your setup's penalty in half, fan or no fan. When they stay damp, a fan that looks fine on paper still costs you points.

Where do the numbers come from? Seven sources

Seven sources set the yardsticks. For each: what it is, and what the check takes from it.

EPA: the 60% line

The US Environmental Protection Agency says to keep indoor humidity below 60%, and ideally between 30 and 50%.1 The number we use: 60%. The check estimates how many hours a day your bathroom spends above it.

ASHRAE 62.2: the 50 CFM floor

ASHRAE 62.2 is the US standard for home ventilation. It and the model residential building code call for a bathroom fan that moves at least 50 cubic feet of air per minute (CFM) if you switch it on and off, or 20 if it runs all the time.2 The number we use: 50 CFM, the floor. For the standard bathroom the check assumes, HVI's rule below raises the bar to 70. The standard sits behind a paywall, so we cite the Department of Energy's summary of it.

Home Ventilating Institute: 70 CFM and 20 minutes

Founded in 1955, the Home Ventilating Institute has certified the airflow ratings on home fans since about 1960.5 It sizes fans for about eight air changes an hour, which for most bathrooms works out to 1 CFM per square foot of floor: its own example, a 7-by-10-foot bathroom, needs a 70 CFM fan.4 And it says a bathroom fan should keep running "for a minimum of 20 minutes after each use of the bathroom."3 The numbers we use: 1 CFM per square foot, which sets the bar at 70 CFM for a 70-square-foot bathroom, and 20 minutes, the fan run the check tells you to aim for.

NIOSH: a sheet of paper and a door

NIOSH, the CDC's institute for workplace health, publishes a room-by-room checklist for spotting damp and mold in buildings. It sizes a problem area against two things everyone has seen: a sheet of letter paper (8½ by 11 inches) and an interior door (32 by 80 inches). Bigger than a door earns the top score, which "should trigger immediate attention."6 The number we use: that size scale. If you report dark spots, we ask how big the biggest patch is, and a bigger patch weighs more.

Kato et al. 2023: buildup grows with age

Researchers gave 26 households in Japan new cotton towels and followed them through six months of daily use. The towels "exhibited odour and dullness after 2 months of use," and buildup in the fabric kept growing for the full six months.7 Kao, the Japanese household-products company, funded it, and its authors worked there. What we take from it: buildup grows with age. So the age of your towels and mat counts, from under six months (lowest) to over two years (highest).

Vinha et al. 2018: the moisture a home adds

Finnish researchers measured how much more water a lived-in home's air holds than the air outside, in 171 houses and 49 apartments.8 The number we use: a starting point set below their cold-weather figures: 2.0 grams per cubic meter when it's cold (theirs: 3.4 to 4.9), sliding to 0.5 when it's warm (the low end of their 0.3 to 2.6). It stands for the everyday moisture a home adds before anyone showers. The whole study is in our indoor humidity guide.

Open-Meteo: this week's weather

Open-Meteo is a free, open-source weather service that combines forecast models from more than 15 national weather services, NOAA among them.9 Its standard forecast runs seven days.10 The number we use: the 7-day forecast for your ZIP code, its average dew point and daily highs. That's why the same bathroom can score differently in a muggy week and a dry one.

How does the check estimate your humid hours?

It starts with the weather outside and works its way into your bathroom, in four steps:

  1. This week's air. We take the average dew point for your ZIP code over the next seven days (the next section says why).

  2. Your home's air. We bring that air to indoor temperature, based on how you heat and cool your home, and add a little moisture for everyday living, set below what the Finnish study measured.

  3. Your showers. Each shower keeps the room above 60% while the water runs and while your fan or window clears the steam. The longer your fan runs after you get out, and the more often the window is open, the sooner the check counts the steam as gone. A shower adds hours only when the room would otherwise sit below 60%.

  4. A reality check. If your towel or mat is still damp hours later, your report counts at least 12 humid hours a day, whatever the math says.

Your humidity points then blend those hours (60%) with how steamed up you say the room gets (40%), because a dripping mirror is a reading you took yourself.

A few choices we made, so you know them. The steps between the weather and your hours use our own starting values, set to be checked against real hygrometer readings. Three things the check assumes instead of asking: a 70-square-foot bathroom (HVI's own example room is 7 by 10 feet),4 a typical 70 CFM fan and a 10-minute shower. And it caps the estimate at 20 hours a day, because a model can't honestly promise a room never dips below 60%.

Want every formula? See the full math on the check's science page.

Why does this week's weather change your score?

Your score uses this week's dew point because it tracks how much water the air near you actually holds, which the humidity percentage on your weather app can't tell you on its own.11 That matters in a bathroom: a fan or a window can only trade your steamy air for the air around it, which is why the EPA's advice changes with the season (let outside air in when it's cold and dry, dehumidify when it's warm and humid).12 Our guide to what the humidity should be in your house (and your bathroom) shows how a 100% winter morning can hold less water than a 50% summer afternoon.

How should you read your score?

A higher Bathroom Biome score means a damper bathroom. Scores run from 0 to 100, and each one lands you in one of six characters, from the driest bathroom to the dampest:

CharacterWhat it means
The Clean RoomMoisture doesn't hang around. Towels, mat and air dry out between showers.
The VentilatorSteamy after showers, but it mostly bounces back.
The Dormant SampleSome moisture risk. A humid week or a skipped fan run can tip it.
The IncubatorWarm, damp and slow to dry. Moisture sticks around long enough to matter.
The Swamp LordDamp for much of the day. Frogs would feel at home.
The BiohazardIt barely gets a chance to dry. The good news: the biggest fixes are free.

Your character and its score range show up right away. Add your email and you get your exact score and the full report: the hours a day we estimate your bathroom spends above 60%, your top risks, and the one change that would help most.

Read the score as a direction. A 75 means meaningfully more moisture risk than a 35. Think of it like a forecast for your bathroom: built on real standards and this week's real weather, and upfront that it's an estimate, not a mold test. It tells you how long your bathroom stays damp. What's growing there is a different question.

Don't wait on a score if you can already see a big patch. The EPA says you can usually clean a patch under about 10 square feet (roughly 3 by 3 feet) yourself; past that, follow its professional cleanup guidance.1 NIOSH's inspection tool goes further: anything bigger than an interior door "should trigger immediate attention."6 Our guide to mold in the bathroom walks through both.

Three checks you can do tonight, no quiz needed

A tissue held up to a running bathroom fan is pulled flat against the grille, a sign the fan is drawing air.
  1. The bedtime towel test. Touch your towel before bed. Dry is a good sign. Still cool and damp is the strongest signal the check looks at.

  2. The tissue test. Hold a tissue up to your running fan and see whether it pulls the tissue up and holds it against the vent. Our guide to mold in the bathroom has the Department of Energy's version and what to do if it fails.

  3. The hygrometer test. Put a cheap humidity meter in the bathroom and read it before a shower, then 30 and 60 minutes after. Our indoor humidity guide shows how to read it, and how to check the meter itself with table salt.

Every bathroom guide in Ionist Labs

We've been working on something for this.

Get first access. And the lab results.

What smells in your home?

Pick any. We won't tell.

We'll email you first access and the lab results, plus occasional home-science notes from Ionist Labs, part of Ionist. Unsubscribe in one click. Privacy policy

Questions

Is the Bathroom Biome check a mold test?

No. It's a moisture-risk estimate. It tells you how long your bathroom stays damp, which is what mold needs, not what's growing there. If you can already see mold, start with our guide to mold in the bathroom.

How long does it take, and what does it cost?

About two minutes, and it's free. No account needed.

Why does it ask for my ZIP code?

To pull the coming week's weather where you live. The same habits can keep a bathroom dry in a dry week and damp in a muggy one, so the check uses your local dew point instead of a national average.

Why does it ask for my email?

Your character and score range are free on the spot. Add your email to get your exact score and the full report, including the one change that would help your bathroom most.

Will my score change if I take it again?

It can. The check uses the coming week's weather, so a muggy week can raise your humid-hours estimate even if nothing in your bathroom changed. Change a habit, like running the fan longer after you shower, and you'll see that in your score too.

Who made the Bathroom Biome?

Ionist Labs, the science side of Ionist. Every source behind the check is listed on this page, and the check shows how much each part of your score weighs.

Keep reading

Sources (12)
  1. US Environmental Protection Agency. "A Brief Guide to Mold, Moisture and Your Home." EPA, last updated February 18, 2026. epa.gov
  2. Pacific Northwest National Laboratory for the US Department of Energy. "Bathroom Exhaust Fans." Building America Solution Center, last updated December 4, 2022. basc.pnnl.gov
  3. Home Ventilating Institute. "How Much Ventilation Do I Need?" HVI, undated. hvi.org
  4. Home Ventilating Institute. "Bathroom Exhaust Fans." HVI, undated. hvi.org
  5. Home Ventilating Institute. "HVI History." HVI, undated. hvi.org
  6. Cox-Ganser J., Martin M., Park J.H., Game S. "Dampness and Mold Assessment Tool for General Buildings – Form & Instructions" (DHHS (NIOSH) Publication No. 2019-115). National Institute for Occupational Safety and Health, Centers for Disease Control and Prevention, December 2018; publication page dated July 2, 2024. doi.org cdc.gov
  7. Kato H., Okino N., Kijitori H., Izawa Y., Wada Y., Maki M., Yamamoto T., Yano T. "Analysis of biofilm and bacterial communities in the towel environment with daily use." Scientific Reports 2023;13:7611. pmc.ncbi.nlm.nih.gov doi.org
  8. Vinha J., Salminen M., Salminen K., Kalamees T., Kurnitski J., Kiviste M. "Internal moisture excess of residential buildings in Finland." Journal of Building Physics 2018;42(3):239–258. doi.org
  9. Open-Meteo. "Free Open-Source Weather API." Open-Meteo.com, undated. open-meteo.com
  10. Open-Meteo. "Weather Forecast API" (documentation). Open-Meteo.com, undated. open-meteo.com
  11. National Weather Service, La Crosse, WI office. "Dew Point vs Humidity." NOAA, undated. weather.gov
  12. US Environmental Protection Agency. "Mold Course Chapter 9: Prevention." EPA, last updated November 10, 2026. epa.gov